Set up your GoSilent Cube

This video contains all of the basic steps required to set up your GoSilent device. For more complete instructions, please see below

• Connect your device to GoSilent

  GoSilent is a tunnel between your device and open internet traffic. In order to function, GoSilent must be the connection through which you access the web. Connection to GoSilent is shown in steps 1 – 5.

• Connect GoSilent to the Internet

  GoSilent does not provide internet access on it’s own, rather it hides your identity while accessing the internet via public wifi or other networks. You must connect GoSilent to the internet in order to access the internet. Connecting GoSilent to the internet is shown in steps 6 & 7

• Plug the two Wi-Fi adapters (included)into the USB ports labeled “Internet” onyour GoSilent
• Go to Step 2

• Plug one Wi-Fi adapter (included) into one of the USB ports labeled “Internet” on your GoSilent
• Plug an ethernet cable (not included) into the ethernet port labeled“Device” on GoSilent
• Plug the other end of the ethernet cable into the ethernet portof your device (i.e. laptop, computer, and etc.). If your device doesn’thave an ethernet port, you can use the included USB-to-Ethernet adapter
• Go to Step 2

• Plug the USB-to-Ethernet adapter (included) into one of the USB ports labeled “Internet” on your GoSilent
• Plug Ethernet cable 1 (not included) into your router/switch/internet source and the other end of Ethernet cable 1 into theUSB-to-Ethernet adapter
• Plug Ethernet cable 2 (not included) into the Ethernet port labeled “Device” on the GoSilent
• Plug the second ethernet cable into the Ethernet port on your device (i.e. laptop, computer, and etc.)
• Go to Step 2

• Use the power cord (included) to plug GoSilent into a power source. GoSilent can be powered by the included wall adapter or a computer’s USB port
• Wait approximately 30 seconds for GoSilent to power up
• Go to Step 3

• Open a Chrome, Firefox, or Edge browser taband navigate to https://setup.gosilent
• You will be prompted that the server certificate is untrusted. Click the Advanced or Details optionand then click on “Proceed to setup.gosilent”, “Accept Risk and Continue”, or “Go on to the webpage”. For more information about the server certificate is untrusted warning, see FAQs Section
• Go to Step 4

• If the GoSilent Admin Console Password has been preconfigured for you, please enterthe password provided by your system administrator. Otherwise, you will be prompted to create a password. Do not lose this password.
• Go to Step 5

• If a saved Wi-Fi connection is available,your GoSilent will automatically connect
• Select the Wi-Fi option. The GoSilent will search for available Wi-Fi Networks
  • Choose the desired Wi-Fi Network and enter Wi-Fi password if requiredIf you are at a new location, you will be prompted to setup an internet connection
  • After connecting to a public Wi-Fi Network, a Captive Portal page may appear. A Captive Portal page is a local login page for the public Wi-Fi Network. Click here to get more info about Captive Portals. If the Captive Portal page appears, complete fields as prompted and click on flashing banner when done to return to the Server Profile Page
• Go to Step 7

• Choose an Enterprise Server or SilentEdge Cloud Server for the VPN Connection
• Select Connect
• Verify the GoSilent Statuses display “Internet Connected” and “VPN Connected” and both the indicators are green

Note: This is an option for Ethernet/Wi-Fi connection methods. If you chose Ethernet Only for your connection method, this setting is unavailable. These instructions are for if you already have an established internet connection via Wi-Fi and you want to change to a different Wi-Fi Network.Open a Chrome, Firefox, or Edge browser tab and navigate to https://setup.gosilent

• If you are connected to a VPN Server, select “Disconnect” on the VPN Server Profiles
• Select “Network” on the left side menu
  On the Internet Configuration panel, select “Change…”
• Select the “Wi-Fi” option. The GoSilent will search for available Wi-Fi Networks
• Choose the desired Wi-Fi Network and enter the Wi-Fi password if required
• After connecting to a public Wi-Fi Network, a Captive Portal page may appear. A Captive Portal page is a local login page for the public Wi-Fi Network. Click here to get more info about Captive Portals. If the Captive Portal page appears, complete fields as prompted and click on flashing banner when done to return to the Server Profile Page

A. The setup.gosilent console is attaching to a web server that runs directly on GoSilent. By default, GoSilent is shipped with certificates that are generated by the Attila certificate authority (CA). If you receive a warning when browsing to the setup.gosilent console, then your browser does not recognize the Attila CA. If you would prefer not to be warned each time that you navigate to the console, then you can configure your browser to identify the setup.gosilent console as a trusted site. Alternatively, you can import the Attila CA root certificate. Moreover, in version 19.02.2.047 of the product, you may upload your own trusted server certificate for the setup.gosilent console, which is issued by the CA of your choice.

A. Refer to the question above, entitled “Why do I receive a warning or exception in my browser when navigating to the setup.gosilent console?”. When you choose to continue to the console after the browser warning, then the URL will display as “Not Secure.” If you do not want to see the “Not Secure” warning, then you can configure your browser to identify the setup.gosilent console as a trusted site.